Can i slide with any longboard

This shifts your weight, however, and will simply cause you to fall backward off your board after the slide. Again practice this position in a flat area.

As you pick up a little speed, go into a crouch and then drop your knee. Practice carving in this position. Wherever the place, just ensure that A you have enough space to get up a moderate speed and B you have enough space to perform wide carves.

In this position, start a long heel side carve. As you are carving, keep your side of your back foot on the board! As you start to carve, put your left hand with the slide glove on! Essentially you want to swing your arms to help you slide on the longboard. Where you place your hand on the road behind you really varies and can be found out easily by testing.

You want to place your hand close to the forward trucks of your longboard and behind a little distance. The distance varies person to person. Remember to let your momentum start and carry you through the slide! You should not be moving your legs at all during the heelside carve; they should stay in the drop knee position.

This will allow your weight and speed to start the slide. Note: During your heelside carve, keep your head up and looking in front of you. The key things to remember in a Coleman slide are head up, front knee pointing up, and your back foot flat against the longboard.

One more thing to note is that sometimes beginner riders like to use their left hand to grab the longboard in between their feet.

Instead, keep your hand right in front of you. Make a shaka or something to keep your hand busy. Does the entire process of learning how to slide seem like a lot? It certainly intimidated me a little when I first learned.

Grab some friends when you go. They might be more experienced and can help cut the learning curve in half. It can be hard to learn how to slide on a longboard. But once you can, it opens up entirely new possibilities for you and your longboard. I recommend stretching and doing regular hip stretches to improve how you squat, so that you can do it comfortably and naturally on board. Foot positioning naturally comes to most riders.

As a rule of thumb, you want your feet to be about shoulder-width apart. You want them particularly your front foot to be positioned in a way you have good leverage turning left or right. Below is a guideline for how you should position your feet when try to turn heelside and eventually do a heelside slide. The image and the positions are simply guidelines. The red highlights where to be putting pressure so you can turn decently.

Below, is the suggest toeside foot positioning when turning toeside and attempting to do toeside slides. You can adjust to a position you are comfortable with. Set up carving is key to sliding. If you want to slide going to the right, refer to the image directly below. Simply follow the curve and try to implement it in your riding. For sliding to the left, refer to the second image below. Either image can be used for both the goofy and regular rider.

Just apply and use the image for the direction you want to slide,. You can check out my indepth Coleman guide here.

It covers everything more indepth than the guide below and has step by step instructions that are well illustrated and explained. It also differs a bit in technique to the one below. I think it is superior, but you might be better off looking and learning at both. Invented by Cliff Coleman back in the 70s, a Coleman slide is one the most reliable ways to slow down on your longboard. It can simply be described as:. Or to the point of braking traction. If your body is in the right position this will be controlled.

You can check out my indepth toeside pendulum guide here. I think it is superior, but you might be better off looking at and learning from both. A pendulum toeside slide is very similar to the Coleman. Here is how to do it:. It is more or less the same not grabbing rail, but what your shoulders do plays a bigger role.

As you do these things, anticipate the hook up from the slide. It can sometimes, be harsh and sudden. For an extremely over the top example, check out how Aaron Hampshire does it in the slow mo clip below. Because he is experienced, he knows how to adjust his weight and slide so he can do them without a setup carve. This is the slide I struggled to get down the most. I had to do a lot of work to get myself flexible and limber enough to squat properly.

Anyway, here is how you do it:. You have a lot of pressure and power behind this leg, but you exert that power and force gently. A post shared by Downhill LongbrdingExplaind downhill The toeside pre drift is on average, more challenging than the heelside. I found it to be a bit easier hands down than heelsides slides, but toeside stand up slides took me forever to get down.

It is a similar process to slide the board when not grabbing rail. In fact, some riders find it easier to do it that, but I digress. Again, like the heelside slide, look where you want to go and keep your shoulders pointed in that direction.

You need to choose the angle you want to slide at beforehand. A post shared by Alex incredimation. These can be challenging initially, but get easier the more you do them. They usually follow this pattern:. Now, if you do these movements correctly, the slide can and should feel sort of effortless. This usually gives rise to better, smoother, more controllable slides at all speeds.

It then just becomes a matter of timing, learning when to push out the wheels or bring them back in. A post shared by Blood Orange skatebloodorange. A post shared by Thiago Gomes Lessa Skate gomeslessa. A post shared by stenliam. The sitdown slide is a bit different. There is no decompression for the slide. You do a set up carve, but you use your back leg to act as a rudder to kick the board out. When you kick the board out, you should ideally have pressure in the right places to keep it sliding and to stop you from high-siding.

The hands-down pendulum slides are typically what most riders learn first. But between the pendulum slides, you typically learn whichever feels most natural. For the heelside slides, the image below can help you visualize and understand where you are meant to be applying pressure and weighting your board.

Again, this is just a rule of thumb, find whats comfortable for you. A clearer image should show up. For the toeside slides, the image below can help you visualize and understand where you are meant to be applying pressure and weighting your board. This is to help you see that different riders do it differently. Everyone does it in their own way. Josh has a very. Troy has a more unique style. He slides with his back leg on the kicktail. When you have your leg this far back, or behind the back truck, it makes it easier for you to get wobbles at higher speeds.

However, it does make it a lot easier to make the board break traction and slide. If you can handle the drawbacks of having your back foot that far back, then this style could work for you. One of the riders I turn to when I talk about form and consistency in technique. Ian Freire is one of the best stand up riders around. He is super consistent with the compression, decompression etc.

Another rider with great form and technique would be Patrick Lombardi. Both these riders have very consistent technique. I had to pick riders to model your style after, it would be Ian Freire and Patrick. This is what makes a pro a pro. They are so consistent in their basics that they do it in each and every slide. This allows him to be really posted up on his front foot. Adam slides like the best and has the track record to prove it too. He can take open roads as fast as he likes, staying in his lane the entire time.

He can compete at the highest level of our sport with no issue. The steps are the same as described above, but the swinging motion is broader and the exit step different.

You rotate through the slide in one fluid shoulder rotation motion. After finishing sliding, you follow through with your shoulders and hips instead of bringing them back to their initial position.

Learning to powerslide, while intimidating at first, is a game of patience and skill building. As a beginner, this will open new frontiers in your longboarding, including the awesome disciplines of freeriding and downhill. If you are a human, do not fill in this field. As an Amazon Associate I earn from qualifying purchases. What is a Longboard Stance? Click here to cancel reply. We use cookies on our website to give you the most relevant experience by remembering your preferences and repeat visits.

Cookie Settings Accept. Manage consent. Close Privacy Overview This website uses cookies to improve your experience while you navigate through the website. Out of these, the cookies that are categorized as necessary are stored on your browser as they are essential for the working of basic functionalities of the website. We also use third-party cookies that help us analyze and understand how you use this website. These cookies will be stored in your browser only with your consent.

You also have the option to opt-out of these cookies. But opting out of some of these cookies may affect your browsing experience. Necessary Necessary. Necessary cookies are absolutely essential for the website to function properly. These cookies ensure basic functionalities and security features of the website, anonymously.

The cookie is used to store the user consent for the cookies in the category "Analytics". The cookies is used to store the user consent for the cookies in the category "Necessary". The cookie is used to store the user consent for the cookies in the category "Other.

The cookie is used to store the user consent for the cookies in the category "Performance". It does not store any personal data. Functional Functional. Functional cookies help to perform certain functionalities like sharing the content of the website on social media platforms, collect feedbacks, and other third-party features.